Progress PHP5320X Uživatelský manuál stáhnout pdf (Strana 35)

Stainless steel or aluminium appli-

ances:

Clean the oven door with a wet sponge

only. Dry it with a soft cloth.

Do not use steel wool, acids or abra-

sive materials, as they can cause dam-

age to the oven surface. Clean the

oven control panel with the same pre-

cautions.

Pyrolysis

Warning! The appliance becomes very

hot. There is a risk of burns.

Caution! If a hob is installed with the

appliance, do not use it at the same

times as the Pyrolysis function. It can

cause damage to the appliance.

1. Remove the removable shelf supports

(if applicable) and accessories from the

appliance. Refer to "Removing the shelf

supports".

Caution! Do not let the removable

shelf supports stay in the appliance

during the Pyrolysis. There is a risk of

damage.

2. Remove the worst dirt manually.

3. Fully close the oven door.

The cleaning procedure cannot start if

you do not close the oven door.

4.

Press

again and again until the dis-

play shows

.

–

The display shows P1 and

one

after the other.

– An acoustic signal sounds as a re-

minder to remove all accessories and

shelf supports from the oven.

– The clock display shows 1:30.

–

Duration

flashes.

5.

When

flashes, press + or - to set

the necessary procedure:

• P1 - if the oven is not very dirty. The

procedure is 1 h 30 min long.

• P2 - if the oven is more dirty. The

procedure is 2 h 30 min long.

6.

Press

to start the procedure.

The bars on the symbol

come on one

by one to show that the temperature in

the appliance increases. The symbol

flashes.

After some minutes the door locks. The

display shows the symbol

.

When the Pyrolysis is completed, the dis-

play shows the time of day. The oven door

stays locked. When the appliance is cool

again, an acoustic signal sounds and the

door unlocks.

To stop the Pyrolysis before it is com-

pleted, press

.

Setting the end time for the Pyrolysis

You can use the End function to de-

lay the start of the procedure.

1. Start the Pyrolysis procedure.

2.

Press

again and again until the

symbol

flashes. The display

shows the time for the end of the

Pyrolysis.

3. Press + or - to adjust the time for

the end of the Pyrolysis.

Shelf supports

You can remove the shelf supports to clean

the side walls.

progress 35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 87 88

Komentáře k této Příručce

Žádné komentáře